How to Choose Cartilage Piercings. │ How to Choose Body Piercings With

Choosing the right barbell is important

How to Choose Body Piercings

To comfortably enjoy body piercings, it is important to first find the optimal barbell. A barbell is a pipe-shaped item that fits into the piercing hole.(The part corresponding to the needle of a typical earring)Please choose the "thickness," "length," and "type" that fit your piercing hole. Also, select the "material" that suits your body type.

index

01. ThicknessChoose. (Check the gauge)
02. LengthSelect. (Thickness of the hole + 1mm)
03. MaterialChoose. (About metal allergies)
04. Type Choose. (4 types of barbells ￥)
05. PartsChoose.

01.

Choose thickness

Gauge size (piercing hole size)
Please check.

Gauge (G) is a unit that represents the thickness of a barbell; the smaller the number, the thicker it is.

Gauge	Diameter	Guideline
14G	Approx. 1.6mm	Common Body Piercing Thickness For those who had their piercing holes made at a hospital, etc., There is a tendency for 14G to be more common.
16G	Approx. 1.2mm	General Earring Hole(Earlobe Piercing)Also, Thickness available for use Slightly thinner as a body piercing
18G	Approx. 1.0mm	Thickness of General Fashion Piercings
20G	Approx. 0.8mm	Thickness of General Fashion Earrings

If you are unsure about the gauge size, 16G is recommended.
*16G is a popular thickness that is easy to use not only for body piercings but also for common earlobe piercings (fashion piercings).

02.

Choose length

The thickness of the earring hole plus 1mm is comfortable.

1). Thickness of the earring hole +1mm

For easier attachment and removal of parts and cleaning of the barbell, we recommend a thickness of the piercing hole plus 1mm.
* If there is a possibility of swelling, an additional +1mm is recommended.

01. What You Need

Please prepare fashion earrings and a ruler. Set the earring backs in the "reverse" direction, and you're ready to go.

02. Put on the earrings

Please insert the earrings from the front while keeping the catch attached.

03. Shift the catchphrase

Please slide the catch to the surface position of the ear. At this time, press with your finger so that the tip of the post does not come out from the back of the ear.

04. Measurement

The thickness of the ear is measured from the position of the catch to the tip of the post.

2). When in doubt, 7mm

The most popular length, easy to use for earlobes and body piercings in various locations.
*If the length does not match,Return & Exchange ServicePlease use.

03.

Choose material

Gentle on pierced ears
Hypoallergenic precious metals are recommended.

About Metal Allergies

The cause of allergic reactions from plated products is the corrosion that allows the internal metal to erode to the surface. The barbells sold by PICOLLET use only 18K gold (K18) and platinum (Pt850) materials, so there is no need to worry about allergic reactions caused by erosion.

PICOLLET Barbell Refining Analysis Results

　K18YG: Au(Fri)75.0%, Cu(Copper)12.5%, Ag(Silver)12.5%
　Pt850：Pt(Platinum)85.0%, Pd(Palladium)15%

*There is a possibility of an allergic reaction to gold or platinum itself. If the barbell you purchased does not suit your constitution,Return ServicePlease use.
* Our company allows an error margin of less than 0.9% for analysis results.

04.

Select type

Characteristics of the Four Types of Barbells and
Please check the number of necessary parts.

	1). Labret Stud Recommended for leaving on A plate catch that doesn't get caught. To keep the back neat, tragus and Popular for inner conks. Required parts: 1 Material: K18YG / PT850 Thickness: 16G / 14G Length: 3mm to 12mm
	2). Straight Set parts front and back Coordination behind the ear. Easy to see the back Popular for earlobes and helix piercings. Required parts: 2 Material: K18YG / PT850 Thickness: 16G / 14G Length: 5mm to 45mm
	3). Banana Face the two parts forward Features a gentle curve. For navels, snags, and locks. Required parts: 2 Material: K18YG / PT850 Thickness: 16G / 14G Length: 8mm to 14mm
	4). Segment Ring Parts can be set on the side Ring type. Recommended for helix piercings. Required parts: 1 Material: K18YG / PT900 Thickness: 16G / 14G Inner diameter: 6.5mm to 10.0mm

05.

Select parts

After choosing the optimal barbell
Please select the parts to set on the barbell.

All parts sold at PICOLLET are
For all barbells sold at PICOLLET
You can use it.
ラブレットスタッドバーベル

Keep the barbell attached to your ear
Only the partsDress-upIt is possible.

PARTS

Choose by design

Does not get caught

View

Choose by earring position

Tragus

View

Choose by size

Small parts

View

Choose by design

Popular among people in their 30s

View

Choose by stone

Birthstone

View

Finally

Enjoy coordinating by changing the combination of parts
Looking forward to spending time browsing the collection

If every day could become even a little more "enjoyable" for you
I am happy.